5 comments about RCA RCU800B Value Pack Remote Controls (RCU800 and RCU403).

1. This thing always loses the codes I set for it. It seems that it only holds a code for a day then it loses its programming. I put new batteries in and it still has the same problem. I feel like throwing this thing into the floor! Never again RCA.



2. I bought this remote because I needed to replace a broken TV remote that had the Guide Plus control buttons. The RCU800 remote was preprogrammed to work well with the RCA TV and Guide Plus, I was able to program it for my Admiral VCR......but nothing else! Not my Panasonic dvd player, not my RCA stereo, NOTHING! The codes for these components in the manual did not work and code search was useless. I don't recommend this product to anyone.



3. This thing is dumb, it never keeps a code and now I am researching for the code and none of them work!!!!!!!!!!!!!!!!! Very frustrating. What a stupid remote and no, its not the user its definately the remote. Not recommended.



4. I think there are better universal remotes out there, we only got this one because we've used it before.



5. Two remotes, one full-featured. Fairly easy to understand. I got them because we have an RCA tv, so setup was easy. No real bells or whistles, but a pretty solid performer so far. I wasn't looking for much more than channel and volume control, but my wife programs DVR and watches quite a few DVDs and she likes it.

5 comments about URC R6 Learning Remote Control.

1. This universal control has limits to learn command. I want to clonar 4 original controls and only could clonar one.
   
   The Sony RM-VL600 8-Device Universal Learning Remote it is far better. This control learn the functions of five original controls of my devices and it has much reach



2. I was really excited about getting this remote because it was a decent price, looked good, and had the ability to learn functions for remotes that weren't coded in. I'm tired of the pile of remotes I have on my coffee table, and I wanted to be able to store them away while I had a single remote do most of what I needed.
   
   Unfortunately it's not listed anywhere in the specs that I could find, but the memory on board is only good for about 30-40 buttons. I have a few devices that either had no codes available, or didn't have all of the commands listed. This includes my Samsung DLP, my Samsung HT system, and my DVR, none of which had full command sets pre-programmed in, so all of them needed to have the commands added through the learning function.
   
   I only bothered to have the R6 learn the commands I actually used on the remotes, but even before I was half way through programming the codes for my home theater system, the component button would just flash an error command.
   
   I dug around online to figure out what the problem was and finally found the 30-40 button limitation not listed on Amazon's site. 30-40 buttons is not enough to program in more than one or two incomplete or non-existent remote profiles.
   
   If you're not sure this remote will have all of the codes you need in order to use it on all your devices, look into the R5 or R7 models instead, which are listed at URC's website as having memory for up to 160 commands. I'll be returning this and looking for another learning remote.



3. This is a high quality and versatile remote. I purchased it on Wal-Mart for $20 and I am very happy with my purchase. It will control most of the functions on your devices.
   
   PROS:
   High quality feel
   It is made out of good quality plastic and the buttons have a nice feedback. The device keys light up when pressed. Clean design and layout.
   
   Easy to program
   I use it to control the main functions on my TV, DVD, Home Theater and Cable Box. The basic device functions worked after punching a 3 digit code listed on the manual. I had to program the rest by placing the original remote in front and following simple instructions. The whole process took less than 10 minutes. The remote will not loose your setup if you remove the batteries.
   
   Macros
   It can be programmed to run a set of instructions by pressing only one button. For e.g. with the click of one button turn on the TV, Stereo and Cable Box.
   
   CONS:
   Don't expect it to control every single function on all of your electronics because it does not have all the buttons or enough memory to do so. You will need to purchase a more expensive remote to have this capability.



4. I've had this remote for two weeks and I'm very happy with its performance. I was sold on this remote by its logical layout of buttons and the fact that it is a learning remote. Other reviewers have pointed out that it has a finite number of learning-buttons it can learn to its memory (40 according to the company's website universalremote.com). For those who are able to successfully use the pre-programmed codes for all or most of their components, I think that the majority of people will find the limit of 40 learning-buttons adequate. (I'm happy to use the original remotes for rarely used esoteric tasks, if necessary.)
   
   Note that the 4 "My Favorites" buttons can be used as macro buttons (to punch in your favorite channel numbers for example) or they can be used as simple "nonmacro" learning-buttons.



5. I purchased this last week from Best Buy. I was a little reluctant at first because the packaging looked a little cheesy. But having checked out various reviews I decided to give it a go. I was planning on buying one of the Harmony series but I said "Its just a remote ...someone has to have one that will accomidate 90% of my functions needed , if not 100% without paying an arm and a leg."
   Anyway my main reason for buying it was because my remote to my Onkyo hts has been on the fritz and like half of the country I was tired of juggling remotes.
   
   Far as programming read the manual carefully first to get the jist of how everything works and how to program your 'macro' settings. After that all is great. I thought I came to problem programming a Manavox DVD/VCR but I belive I used two different codes even though it is the same unit. For the basic On/Off on the Onkyo hts progamming was ok but far as changes with with radio stations I set the macro setting by holding the old remote face to face . I belive I did the same trick for changing hts setting like 'neo ceniema' or 'dts music' or 'all speaker' etc...
   
   So far it seem to be working well. Will keep you posted. I didn't give it five stars because the buttons are not backlit ;)

4 comments about Color Pronto Remote Control - TSU9600.

1. The wow, times 6 refers to the 6 remotes that I was happily able to put in a drawer by replacing them all with this beauty.
   
   Obviously, it's very expensive and I will tell you right now that I know that it is WAY over-kill for my modest system, but I haven't regretted getting it for one second. Also you need to know that unless you have some programming skills, then you will need someone to program it for you and that will add to the over-all cost, as well. It has zero capability of controlling your system out of the box, and must be custom programmed for all of your devices, and thats not a simple task.
   
   Here's what I have programmed it to control:
   
   Panasonic plasma TV
   Tivo HD
   Toshiba HD DVD player
   Onkyo receiver
   Sony PS3 ( using IR USB adapter from Nyko BluWave remote set )
   Roku SoundBridge ( via 802.11g wireless communication to SlimServer running on my home network ).
   
   It can also access the internet to grab things like the current time, and weather.



2. The Pronto TSU9600 is a powerful control panel that should easily replace all of your remotes, allowing you to consolidate your home theater control in one stylish, easy to use unit. However, programming this unit is not for amateurs. I have the Pronto Pro and had become fairly adept at programming it, but it took many hours to master. The 9600 is far and away more complex, and not user-friendly by anyone's definition. On the plus side, it is a beatiful piece of work, and works great once you have it programmed. If you're technology friendly, I highly recommend it.



3. Color Pronto Remote Control - TSU9600 This is a very difficult piece of equipment for the average person to program. I had to get help from a professional and it is still not completely working the way I want it to work. The unit is nice looking but I have noticed that it is best to keep it on the charger. I only purchased it for TV (several) programming. I have several TV's of the same brand and couldn't find a devise that would work each individually. This Pronto does the trick! I do not have a whole house lighting system etc. I have since found other less expensive controllers that would work.



4. Was exactly what we were looking for. Will do anything you ever want a remote to do. May be a bit advanced for the average person setting things up for themselves though. Really geared toward the professional installer.
   
   Can't access Java scripts unless you go through training and take a test

4 comments about URC MasterControl RF10 Universal Learning Remote w/ RF Capability.

1. Progamming up is very easy , buttons are laid out very well. This "is" the last remote you'll ever need. I have another previous model and could not be happier. The light is a good idea when your watching your favorite shows at night , but this model has a "red" light back ground illumination which is very hard to see. The other model had a normal "greenish white" back ground which worked well. I'm not sure why they chnaged it , they should go back to it. I would have rated it 5 stars otherwise due to hard to see lighting..



2. Probably OK but would not fully learn the volume control function for an Olevia TV. Instructions lacking for use of the DVR controls.



3. I have used various brands of universal remotes over the past 12 years, and I think this one is the best. I have never yet been able to get one remote to control all my components satisfactorily until now.
   
   I just bought a new Sharp Aquos TV, Panasonic Blu-Ray, and Onkyo 100 watt receiver. Plus I have an AT&T Uverse Motorola box. Since some of these items are brand new, no remote codes would work (although the Onkyo remote came close).
   
   This remote did not have the preprogrammed codes either...BUT...you can program this remote to do everything your other remotes do. It took an hour or so, but now it works ALL COMPONENTS! Woo hoo! I especially like the fact that it has specific Receiver buttons (like DTS, THX, DD) that MOST universal remotes do NOT have. So when I want to switch to THX sound, I just press Shift+THX on my remote and it switches...just like my receiver's remote would.
   
   Plus, this remote's macro capability is endless...and it includes a Pause control so that you can make the macro pause for several seconds (while a component is turning on, for instance) before moving to the next step. This is VERY handy for slow starting components like Blu-Ray players and high-end Receivers.
   
   The buttons are VERY well placed, and the light button on the side is ingenious.
   
   It will take some time to get this set the way you want...but it is well-worth it!



4. The light leaves much to be desired...we bought it mostly because it lights up, but the light is red for some reason, and does not light the buttons very well. Otherwise, it does what it is supposed to do, and is fairly easy to program, as long as you are good are following the manual directions.

5 comments about Audiovox D940 Remote Control Signal Sender.

1. This item works perfectly with my Direct TV box and two TVs. I can now change channels, etc on my bedroom TV via my Direct TV box in the living room (about 50 feet). I have the receiver base control sitting about 15+ feet from the Direct TV box with no problems. It took about 5 minutes to plug in each unit and all was done! I am using a programmable remote as the extra remote for the bedroom TV. Very nice product ... Recommended.



2. Performs far better than I expected. From the basement to the receiver
   in the other end of the house (on the next level) works great.
   
   Well worth the money, especially if there is no UHF remote available.
   It works with my VCR also.
   
   Roger123



3. You have to be close to the sender for it to get a single from a DTV remote with new batteries. I even tried 3 different remotes. Maximum range from the remote you hold in your hand to sender 8 ft.



4. I have this very sender in use for the past 8 years and now with this purchase of a second set it has expanded my dp322 to an additional TV.
   Great item, and I reccomend it to friends and neighbors.



5. This remote sender unit is not the same as the RCA unit that is pictured
   in the sales ad. Don't expect to get a remote extender that looks or
   performs like the RCA D-940 pyramid. They are not the same. The audiovox
   model is fair, but not as good as the RCA D-940.

2 comments about Vista Media Center Remote.

1. I really wanted this product to work. I was excited to have a remote that could control my Vista Media Center PC, TV, Receiver, and Cable Box. It works MOSTLY as advertised (the mouse control is GREAT), except for 2 major problems that are not what you would expect.
   
   1. In the AUX mode, I programmed it to match my Onkyo receiver with the code book provided. All buttons worked properly, except the volume and mute controls did not adjust the volume on the receiver. I tried to override them with the learning function, but they still did not work. Interestingly enough, I could override the TV mode's volume controls to control my receiver volume, but not on the AUX mode. Not sure if it is defective or some limitation of the AUX mode.
   
   2. In the PC mode, you cannot program any of the buttons - they are all tied to the PC so you cannot, for example, make the volume buttons in the PC mode control your receiver. That means you have to switch to TV or AUX mode to control the volume of anything but the PC. A definite deal breaker for anyone who has a receiver or doesn't use the PC to control volume.
   
   FYI - I called tech support, and the man I spoke to said he didn't know anything about the "newer products" and transferred me (after accidentally hanging up on me) to somoeone who did. That guy had no idea what the problem was and insisted that my receiver must be the problem. Not super helpful, and this solidified my decision to return.
   
   Also, there is a label in the box that says "In order to enable all Media Center features, visit http://www.gyration.com/remote-update. This URL does not exist. Searching the Gyration site also yielded no support information, manuals, or downloads of any kind for this product.
   
   Great product idea, but very poorly executed.



2. The mouse works great in this remote. Some glitches are that:
   
   occasionally, we have to reprogram for our other devices
   the mouse gyros broke, but we have three small kids, so that doesn't mean anything
   the other devices are not perfectly matched up to the buttons, as the other reviewer stated
   
   However, we are ordering another one because the TV, PC control and mouse features are indispensable.

2 comments about Philips TSU9200 Pronto Universal Remote Control.

1. My Harmony 880 remote died recently due to the infamous battery charging issue. Anyways, as I was researching a replacement for the 880, I came across the Philips TSU9200. First impressions were "Wow, this a stunning piece of equipment!". It also had all of the features I was looking for, i.e. activity based commands, ability to learn new IR commands, customizable (more on this later), rechargeable battery, and reasonable price. I was excited when I received the remote. Aesthetically, it is a truly a beautiful remote (kudos to the designer)! My research had told me that there was some legwork to be put in to get the remote to work properly, but I didn't realize how much. So, I loaded the Pronto Configurator, the software that you use to configure the device and connected the remote to my computer via the USB connection. Similar to the Harmony 880, there is a default device database. I entered my equipment in - most of my equipment was found in the database, except for, ironically, my Philips DVP-5960 DVD player. I started setting up my activities... I really like the 'Test' function in the software that let's you test the remote commands with the remote still connected to the computer. I recommend, if you are configuring this remote, to connect it to a computer that is close your equipment or to a laptop. I had a little trial and error since not all of the default codesets are tied to a descriptive equipment name as with the Harmony remotes (i.e. instead of 'ReplayTV 5504', I had to figure out that it was 'ReplayTV: Codeset 0643'). Of course, I also misplaced my Philips DVD remote. The Philips DVD player codeset was nearly impossible to find. I searched for about an hour for a suitable codeset. Nothing on the Philips Pronto site. I finally found a usable set on remotecentral.com but I had to extract it out of an existing CCF configuration file - that was time consuming. Ok, so I get it configured to a point where I think the remote will function properly. The update of the remote is really quite quick - much faster than the Harmony process. I click on the 'Watch TV' activity that I've set up, great, TV turns on, ReplayTV turns on, Tuner works, Inputs switched. Next, I click on the 'Watch DVD' activity, DVD turns on, TV input doesn't switch right from Component to HDMI. Ok, no biggie. But, I notice that the ReplayTV is still on! I expected it to shut the ReplayTV off and turn on the DVD player, just like my Harmony used to do. Hmmm, ok, I re-hookup the remote to my computer. A little research later.... oh, my DVD player, ReplayTV, CD player, and cable set top box only have a Power Toggle option that defaults for the equipment - not a Power On and Power Off action. For those of you who are used to your remote switch from activity to activity while shutting down the previous activity, this is a problem. Since a Power Toggle cannot determine the state of the equipment, i.e. whether it is currently turned on or turned off, if you are switching from activity to activity, the remote won't be able to effectively turn on/off your equipment. It's not as simple as clicking on 'Device' as you would with the Harmony remote, selecting the device, and clicking on a Power action. You need to set all that up as well! Ok, I'm thinking, there must be discrete codes for Power On and Power Off for my equipment somewhere on the internet. I spent 3 hours locating the discrete codes for the majority of my equipment, downloading hex editors, hex converters, CCF disassemblers, sorting through CCF configuration files, testing and retesting. I still don't have it the way I'd like it configured. And the missing discrete codes for some of my equipment almost makes it impossible for this remote to function properly!! I'm sure I could spend another night to figure out how to make it all work, but what happened to ease of use? I miss my one-click Harmony, click 'Watch TV', my TV comes on, ReplayTV on, Tuner on, I flip over to 'Watch DVD', my ReplayTV shuts down, my DVD turns on, I hit 'Power Off', everything shuts off.
   
   5 hours later of fiddling with this thing, I'm on the verge of returning it and just getting another Harmony 880. Bottom line, the remote is very nicely designed from an aesthetic standpoint. The software is intuitive, fairly flexible. The programming logic (or lack thereof) will make this remote challenging to set up correctly (i.e. the remote doesn't remember your previous activity and knows what state your equipment is in so that when you select another activity, it can determine which devices it needs to turn on/off). The seemingly impossible to find discrete codes that make this remote usable was an utter disappointment. If your equipment doesn't support discrete codes, at least for Power On and Power Off, I think you are going to have some real problems using this remote.



2. I have been waiting and looking for reviews on this remote for some time but have been unable to find anything substantial so I just ordered it keeping in mind the hassle free returns I've had with amazon in the past.
   
   I purchased this remote for my father-in-law and our primary reasons for doing so were the reputation of full customization Phillips has garnered for their pronto line of remotes and the ability to display music being played from a media center PC on the remote's LCD thus allowing the TV to remain off or for use in a separate room.
   
   Thus far I've only spent a good hour or two with the remote and have not completed initial setup but wanted to give some preliminary insights to those who might like us be on the fence with this remote and its likely competitor the Logitech One.
   
   This remote while dubbed a Pronto can really be considered a pronto-lite. The higher end Pronto remotes use a seperate piece of software called pronto edit while this one uses a brand new application called ProntoConfigurator which is more of a setup wizard. While still very powerful, the ProntoConfigurator is definitely suffering from initial release bugs which I hope will be fixed in subsequent updates. As an example some input boxes hide partially behind images and other parts of the form.
   
   I'm certain that the idea behind going to a wizard based setup for the TSU9200 is to make the Pronto a little more end user accessible like the Logitech One (other Prontos are designed to be programed by a professional installer). To this end however I don't believe Phillips has been successful. I was rather disappointed with the very limited database of components found in the database. In fact of the devices it is intended to control, only the Windows Media Center PC and the Sony receiver were found. The Pioneer Elite Plasma and Motorola DVR/Cable box were not. The second area where the initial setup falls short of Logitech's is that while this is an activity based remote, when you assign components to perform an activity the automatically generated macro has very few steps in it, really just a sample and not nearly enough to actually perform the task. While I'm not really put off by this I offer it as fair warning to those just wanting a quick and easy remote setup.
   
   Physically the remote is a beautiful product. The exterior is the currently popular gloss piano black and the LCD screen looks very nice and clear. This remote is not a touch screen and I'm actually glad of it as I haven't had good luck with button precision in the past on remotes that use them. On a small screen I've found it takes way longer to find an icon and correctly align your finger than to spin the cool dial on this remote to select it. The dial is also something I really like for quickly scrolling though lots of items displayed on the LCD.
   
   I have not yet gotten to the stage of setup where I am able to review the features of this product which actually compelled its purchase, however I will post back here for you all as soon as I can.

No comments about Sony RMV210 Universal Remote Control.

2 comments about weemote TV Remote for Kids, V7.4.

1. This is a wonderful product that allows the parents to program a remote control just for the kids. It allows the kids to turn on the TV and/or cable box, satellite box, Tivo, etc., control the volume (or this feature can be turned off) and pre-sets the channels the kids can watch. The instructions are easy to follow and if you happen to have DirecTv, the kids channels are already programmed for you. This WeeMote controls the latest and greatest A/V equipment and I have to say my children have become addicted to the power! We had an older model for our old TV but it didn't work with our new HD set up. So we got this for their birthday they love it...and we love it. One thing to watch, though, is that if you program certain channels like Disney and Discovery Kids, they change to more mature programming later in the day and the Weemote will still allow the kids to go to those channels. We monitor them more closely in the evenings for that reason.



2. Small boy has a beater TV that doesn't even say the manufacturer on it. Took less than 15 minutes to set it up with Time Warner Cable. He cant break it (yet) and seems to grasp the concepts already.

5 comments about Dynatron Miracle Remote for Toshiba TVs - MR120.

1. I have a 1997 Toshiba 27" television set. The remote broke long ago and finding a replacement produced a, 'no longer available'! Even the Toshiba company had stopped manufacturing this item long ago. Every effort brought me to a dead end. What I should have done was come to Amazon first! I received my Dynatron MR120 today and it is everything the manufacturer advertised. It has all the options that my original remote had including all the PIP settings, surround sound, and menu choices. I consider it a fantastic deal at a very reasonable price.
   Victor G



2. Our dog thought our original remote was a chew toy, so I bought a cheap universal remote as a replacement. The universal worked basic features like volume and changing channels, but we dearly missed our picture in picture! The Dynatron Miracle Remote was the answer. It is an awesome product. It's not fancy. It looks a little cheap, but it does everything it promises. I must be honest & say that the first Dynatron remote I ordered had a glitch that prevented the power button from functioning properly. It happened within the first 30 days but it was too late for me to return it to the online retailer I purchased it from. I contacted the Dynatron company directly & they asked me to send my remote in for a replacement. I did & they replaced it for me almost immediately, with no hassel, dispite the fact that I didn't have a receipt and didn't purcahse it directly from them. I was very impressed with that & the new remote works perfectly.



3. The Miracle Remote not only has all the functions that the original remote had, but it's easier to use. Great product!



4. We lost the remote to our 36" Toshiba Cinema Series television that was manufactured in 1998. The remote control for my Dish satellite would turn the TV on and off, change channels and volume, but I could not access any of the TV's advanced features such as PIP, surround sound settings, etc.
   
   As soon as I took the MR120 out of the box and put batteries in it, it worked just like the original remote did. ALL TV features are now accessible. Works beautifully.



5. I have a 2002 Toshiba TV and the remote doesn't work at all. I'll try exchanging it but by the time shipping adds to the cost this isn't such a good deal.